Copy the project database file and install it on a second device for InLoox PM 8 Personal Plus


You are here: InLoox Support Knowledge Base Online Help InLoox for Outlook 10.0 All support articles | InLoox 10 for Outlook Install InLoox 10 for Outlook How to duplicate and install the project database

The InLoox PM 8 Personal Plus edition allows you to install InLoox on two different devices. In order for you to access your project data from a second device, you need to copy the database files first.

Please follow the instructions below:

  1. Open the InLoox PM installation directory on the source device. The default directory is: 

     C:\Programs\InLoox\InLoox PM

  2. Copy the files inloox.mdf and inloox_log.ldf.
  3. Paste the files to the InLoox PM installation directory on the target device.
  4. The database is now ready to be used on both devices.

If you prefer to save the database files to a different directory (a local directory), please follow the instructions below:

  1. Copy the files  inloox.mdf  and inloox_log.ldf, and paste them to the directory you like.
  2. Run the InLoox System Manager. You can find the required file here:  http://cdn.inloox.com/content/download/20639/232074/file/InLooxSystemManager_20140428.zip
  3. Select the following Server type: LocalDB (Personal Edition, InLoox PM 8)

    .

  4. Replace the default path in Additional parameters with the directory of your choice.

  5. Click on Test Connection to test the database file path.
  6. If the test is successful, click on Next to continue.
  7. Select Set connection for InLoox PM.

  8. Click on Next.

    The connection has been successfully changed and InLoox PM is now ready to be used on both devices.